Balers/Briquetters

Logemann Scrap Briquetter making 12" x 8" Briquettes: MC-444

Logemann Scrap Briquetter making 12" x 8" Briquettes: MC-444

Contact us for price

Manufacture: - Logemann Brothers - Model 128-SE Upgrades: - This unit was recently Overhauled with: a. New Hydraulic Lines b. New Operator Controls c. New Safety Cage d. Th...

Galland-Henning Baler: MC-432

Galland-Henning Baler: MC-432

Contact us for price

Manufacture: - Galland-Henning - Model 30DC Bale Size: 12" x 12" x Variable (305 mm x 305 mm x Variable) Capacity: 8-12 bales per hour Current Condition: Running in manual mode. Can be recond...

New Aluminum Baler: MC-436

New Aluminum Baler: MC-436

Contact us for price

Manufacture: - McIntyre (UK) - Model: Metallican M40 Specifications: - Please see the technical data in the attachment below. from Phipps Co. equipment suppliers USA

Casters - Billet/Log

Wagstaff Vertical DC Aluminum Log Cast House: MC-422

Wagstaff Vertical DC Aluminum Log Cast House: MC-422

Contact us for price

Manufacture: Wagstaff Tooling Models: - 6" Airslip = new 2008 - All other tables upgraded from Maxicast to Airslip over time Equipment Tooling / Casting Tables - 6" Maxicast (152mm): Table, s...

Casters - Continuous Strip

1350mm Twin-Roll Aluminum Continuous Strip Caster: MC-410

1350mm Twin-Roll Aluminum Continuous Strip Caster: MC-410

Contact us for price

Manufacture - Castal Ltd. (Greece) Cast Strip Width - 1350 mm max (53.15") Cast Strip Thickness - Maximum: 12.0 mm (.472") - Minimum: 4.2 mm (.165") (4.2 mm thickness was achieved by owner) Ca...

Hazelett Narrow Continuous Strip Casting Line: MC-433

Hazelett Narrow Continuous Strip Casting Line: MC-433

Contact us for price

Manufacture: - Caster: Hazelett (USA) - Rolling Mills: Wellman (UK) Strip Width - 305mm max (12") Material: Aluminum or Zinc Equipment Melting Furnace - Stationary reverb - Natural gas fi...

Two (2) 1600 mm SCAL Aluminum Twin-Roll Strip Casters: MC-439

Two (2) 1600 mm SCAL Aluminum Twin-Roll Strip Casters: MC-439

Contact us for price

Manufacture: - SCAL / Pechiney - New 1971 Design: 15-degree tilt type Casting Width: 850-1600 mm / 33.5 - 63" Casting Thickness: 6-10 mm / .236 - .394" / 8.0 mm nominal Casting Speed: 1.0 met...

56" Hunter Twin-Roll Aluminum Strip Caster: MC-429

56" Hunter Twin-Roll Aluminum Strip Caster: MC-429

Contact us for price

Manufacture: Hunter Engineering / new 1965 Strip Width: - Min - 24" / 610 mm - Max - 56" / 1422 mm Cast Strip Thickness: - Min - .125" / 3.175 mm - Max - .250" / 6.35 mm Casting Speed: 20-60...

65" Hunter Twin-Roll Aluminum Strip Caster: MC-428

65" Hunter Twin-Roll Aluminum Strip Caster: MC-428

Contact us for price

Manufacture - Hunter Engineering Strip Width - Min - 24" / 610 mm - Max - 65" / 1650 mm Cast Strip Thickness - Min - .125" / 3.175 mm - Max - .250" / 6.35 mm Casting Speed - 20-60 inches per...

Dross Equipment

Rebuilt Tardis Model 1062 Twin-Ram Dross Press: MC-413

Rebuilt Tardis Model 1062 Twin-Ram Dross Press: MC-413

$125,000 (USD)

Manufacture: - Tardis Model 1062 - Rebuilt 2019 Design / Type: - Twin hydraulic pressing rams - "Snuffing head" = non-rocking to best handle hot dross Included in this Rebuild Press: - Press hous...

Tardis 1577 Dross Press: MC-427

Tardis 1577 Dross Press: MC-427

Contact us for price

Manufacture: - Tardis (JMC Recycling, UK) - Model: 1577 Hydraulic Rams: - Double ram design (2 rams) Equipment Press: - Press housing - Hydraulic rams (2) - Press head (forced air cooled) - Full...

Six (6) Refurbished Dross Drain Pan / Sow Mold Sets: MC-434

Six (6) Refurbished Dross Drain Pan / Sow Mold Sets: MC-434

Contact us for price

Construction: Cast Iron Purpose: Mechanical pressing of dross for aluminum recovery Condition: Refurbished: - Lightly ground - Sand blasted - 2 coats of boron nitrate Drain Pans: Two (2) avai...

NEW Aluminum Dross Recovery Systems: MC-375

NEW Aluminum Dross Recovery Systems: MC-375

Contact us for price

Manufacturer: - Sanwa (Japan) Models: - "ARS" (Aluminum Recovery Systems) - Different capacity systems based on your needs System Design: STEP ONE ... STIR THE DROSS - Skim dross from furnace...

Melting/Holding Furnaces

120,000 LB Melting Furnace: MC-442

120,000 LB Melting Furnace: MC-442

Contact us for price

Details forthcoming

Molten Metal Transfer

2019 Altus Engineering Patented Molten Metal Recirculating and Transfer System: MC-443 Molten Metal Pumps

2019 Altus Engineering Patented Molten Metal Recirculating and Transfer System: MC-443 Molten Metal Pumps

Contact us for price

PLEASE SEE ATTACHED BROCHURE FOR FULL DETAILS. FEATURES: POSTS: - Patented "Twist-Lock" system - Installs very simply ... just lift, insert and twist - No mortar, pins or springs required! - ...

Scrap Delacquerers

Scrap Delacquering System: MC-420

Scrap Delacquering System: MC-420

$550,000 (USD)

Manufacture: - CEC (Consolidated Engineering Co. - USA) - New 1996 Description - Three-zone CONTINUOUS CONVEYOR type delacquerer - For the removal of organic content from shredded aluminum scrap -...

Sow Molds

1,500 lb Molten Capacity Low-Profile Sow Molds: MC-438

1,500 lb Molten Capacity Low-Profile Sow Molds: MC-438

$2,350 (USD)

Design: - Low-profile type Capacity: - 1,500 lbs molten aluminum Quantity: Varies Condition: Good to very good Sold "as is" EXW loaded on your truck. from Phipps Co. equipment suppliers USA

Tilting Rotary Melting Furnaces

22,000 lb Tilting Rotary Furnace: MC-389

22,000 lb Tilting Rotary Furnace: MC-389

Contact us for price

In 2018 and 2019 we had all missing components built NEW to make this furnace complete and more attractive to buyers. This includes the frame/base. New photos will be available June 2019. Manufa...