Used 72" x 7.50" Complete Slitting Line: S-312
Slitting LinesFOR SALE ... 72" x 7.50" x 60,000# Stamco Slitting Line: S-312
Manufacturer
- Stamco, new 1987
Material
- Cold rolled / Hot rolled / Aluminum / Galvanized
Strip Width
- 12" - 72" (305 - 1829mm)
Strip Thickness
- Reference strip = .187” x 72” at 50,000 psi stainless steel
- For stainless = 10 gauge (.135") grade 80
- Cuts = 6-10 for .125" stainless grade 80
Coil Size
- Entry ID - 20-24" (508 - 609mm)
- Exit ID - 20" (508mm)
- Entry OD - 72" (1829mm)
- Exit OD - 72" (1829mm)
- Entry coil weight - 60,000 lb max (27,215 kg)
- Exit coil weight - 40,000 lb max (18,144 kg)
Line Speed
- 400/1200 fpm (1312/3936 mpm)
Line Direction
- Right to Left
Equipment:
Entry 4-Arm Turnstile:
Hydraulic Rotation
C-Hook Type Arms
Entry L Type Coil Car:
60,000# Capacity
24" Vertical Lift Range
Self-Contained Hydraulic Unit
10 HP AC Motor
Mandrel Uncoiler:
60,000lb Capacity
78" Face Pumpkin Tooth Mandrel
Electric Motor Threading Drive
Wichita Water Cooled Brake
Sliding Base
Holddown Roll
Hydraulic Peeler Table:
Entry Pinch Rolls:
8" Diameter x 78" Face Rolls
Hydraulic Crop Shear:
78" Blade Length
Slitter Heads:
Two (2) Injector Type Slitter Heads
7.50" Diam. Arbors (190.5mm)
Double Eccentric Arbor Adjustment
100 HP DC Motor, 1750/2150 RPM
2 Speed Transmission
Gear Reducer w/5.056:1 ratio
Hydraulic Strip Clamp / Threader with Hydraulic Traverse
Recoiler Thread Table
Looping Pit:
Included
Tension Stand:
Roll Type
Water Cooled Brake on Bottom Roll
Recoiler:
40,000# Capacity
20" Dia. x 78" Face Drum
Hydraulic Push-off Plate (84" Stroke Cylinder)
Overarm Separator
150 HP DC Motor, 850/2550 RPM, 500 V
2 Speed Gearbox w/13.4:1 and 40.1:1 ratios
Scrap Baller:
25 HP AC Motor
Exit L Type Coil Car:
24" Lift Range
Self-Contained Hydraulic Unit
10 HP AC Motor
Exit 4-Arm Turnstile:
Hydraulic Rotation
Slitter Tooling included
Sold "as is" where is EXW off foundation USA.