64.5" Stamco Light Gauge Aluminum Tension Leveling Line: TLL-193

No longer available
64.5" Stamco Light Gauge Aluminum Tension Leveling Line: TLL-193
Description
Manufacture
- Stamco / new 2000
Strip Thickness (Actual Use)
- .004 - .032" (.102 - .813mm)
Strip Width
- 64.5" max (1638mm)
Line Speed
- 1000 fpm max (304 mpm)
Coil Size
- ID - 12 - 20" (305 - 508mm)
- OD - 60" max (1524mm)
- Weight - 16,000lbs (7.2 mtons)
Capabilities
- Aluminum alloys with yield strength from 15,000-30,000 psi.
- Last use = fin stock and litho sheet leveling.
Equipment
- Entry Coil Car
- Floor level "V" type, coil saddle
- Uncoiler
- Expanding mandrel type
- 14.5”-17.0” bare diam w/ spacers to 16.5”-19.0”
- 72” mandrel face
- Spool handling / Holddown roll / Stationary base
- Variable speed AC drive: 100 hp, 400/2000 rpm, 6.28:1 gear ratio
- Strip Cleaning Section
- 4-stage system: 1. Clean, 2. Hot rinse, 3. Hot rinse, 4. Blow-off
- Entry Bridle Section
- 4-roll design - Each roll individually driven
- Roll 1 = 24.0" diam, 60hp AC
- Roll 2 = 23.7" diam, 125hp AC
- Roll 3 = 23.4" diam, 250hp AC
- Roll 4 = 23.1" diam, 500hp AC
- 72" roll faces / 1829mm
- Flex Roll Section
- 5 roll cassettes – 2 over 3
- 2.5" diam work roll
- 7.0" diam backup rolls
- 72" roll faces / 1829mm
- Transverse bow correction roll on exit side
- Exit Bridle Section
- 4-roll design - Each roll individually driven
- Roll 5 = 23.0" diam, 500hp AC
- Roll 6 = 23.3" diam, 250hp AC
- Roll 7 = 23.4" diam, 125hp AC
- Roll 8 = 23.1" diam, 60hp AC
- 72" roll faces / 1829mm
- Edge Trimmer
- Trimmer head and tooling
- Interchanges with the slitter head (common base)
- Scrap Baller
- Scrapped!
- Including scrap blower system!
- Slitter Head
- 5.0" diam arbors x 72" face
- Tooling is included
- Interchanges with trimmer head (common base)
- Recoiler
- Expanding mandrel type
- Collapsed bare diameters of 11.0”, 15.0”, 19.0”
- Expanded diam w/ spacers of 12.5”, 16.5”, 20.5”
- 72” mandrel face
- Hydraulic coil push-off / Spool handling / Stationary base / Outboard bearing
- Variable speed AC drive - 100 hp, 400/2000 rpm, 6.272:1 gear ratio
- Exit Coil Car
- Floor level "V" type
- Coil Upender Included
- Drives (some cannibalization of components)
- Eurotherm 620 Vector drives
- Eurotherm Integrator 690 AC drives
- GE Fanuc PLC Controllers
Condition
- Been sitting several years
- Rubber coated rolls need recovering
- Drives have been cannibalized by plant
Sold "as is, where is" EXW on foundation USA.
Specifications
Manufacturer | STAMCO |
Year | 2000 |
Condition | Used |
Stock Number | TLL-193 |