60" x 7" Cincinnati/Forte Slitting Line

60" x 7" Cincinnati/Forte Slitting Line

orCall +1 (336) 597-2370

Description

FOR SALE: 60" x 7.00" x 24,000LB Cincinnati/Forte Slitting Line


Manufacture

  • Cincinnati/Forte
  • New - 1969
  • Many upgrades


Material

  • Cold rolled + Aluminum


Strip Width

  • 60" max


Strip Thickness

  • .010" - .119"


Coil Size

  • Entry ID = 16 - 24"
  • Exit ID = 16" / 20" & 24"
  • OD = 60" max entry and exit
  • Entry Weight = 24,000 lbs
  • Exit Weight = 20,000 lbs


Max. Shear

  • 45,000 PSI


Max. Yield

  • 45,000 PSI


Line Direction

  • Left to Right


Mode of Operation

  • Driven


Line Speed

  • 250 / 500 fpm (approx.)


Equipment

  • Entry Turnstile:

 Four (4) Arms x 25,000lbs/arm

 Powered Rotation 

 Slotted for C-Hooks 


  • Entry Coil Car:

 Mast Type 

 Floor Mounted 

 Powered Lift and Traverse 

 Self-Contained Hydraulics 

 Machine Mounted Controls 


  • Uncoiler:

 Single Mandrel Type 

 Hydraulic Expansion 

 Holddown with Powered Snubber Roll 

 Wichita Water Cooled Brake 

 AC Feed up Drive 

 Slide Base 

 Paper Winder 


  • Outboard Support - A & B:

 Powered Extension / Retraction 


  • Entry Unit:

 Extending Blade Peeler 

 Manual Side Guides 

 Powered Entry Pinch Rolls (incomplete) 

 PVC Applicator 

 Idler Pinch Rolls for PVC Application 

 Rotary Crop Shear 


  • Stationary Slitter Base:

 20 HP AC Leeson Feed up Motor, 1750 rpm 

 Renold Gear Reducer, 41.8/1 ratio

 75 HP Baldor DC Motor, 1760 RPM, (New in 2001) 

 Powered Head Lock 


  • Two (2) Slitter Heads:

 Injector Type 

 Powered Traverse 

 Powered Top Arbor Adjust 

 Powered Outboard Retraction 

 "Over the Arbor" design for slitting widths between 48-60" 

 Head #1 - 5" Diameter Arbors 

 Head #2 - 7" Diameter Arbors 


  • Pit Section:

 Inspection Table 

 Powered Cross Over Table 


  • Tension Stand: Combination Drag and Roll Type

 Strip Separator Arm 

 "Drag" Type with two (2) Cylinders 

 Two (2) 14" Diameter Tension Rolls 

 Two (2) Wichita Water Cooled Brakes 


  • Recoiler:

 16" Dia. Drum

 Hydraulic Pushoff 

 Hydraulic Expansion & Gripper 

 Overarm Separator Assembly 

 150 HP Baldor AC Motor, 1150/2000 RPM 

 Two (2) Speed Transmission, 2:1 and 1:1 ratios 

 Bolt-on Risers for 20" & 24" 


  • Exit Coil Car:

 Mast Type 

 Floor Mounted 

 Powered Lift and Traverse 

 Self-Contained Hydraulics 

 Narrow Coil Retainers 

 Machine Mounted Controls 


  • Exit Turnstile:

 Two (2) Arms x 20,000lbs/arm 

 Powered Rotation 

 Slotted for C-Hook 

 Powered Lift / Retract 


  • Two (2) Scrap Winders:

 Hydraulically Powered 

 Manual Scrap Dump 

 Level Wind 


  • Electrical Controls:

 Main Operators Control Console 

 Auxiliary Operators Control Console 

 75 HP DC Drive for Slitter Head (New in 2003)

 150 HP DC Drive for Recoiler (New in 2001)


  • Slitter Tooling:

 Approx. Knife Count

 80 - 0.250" x 5" ID 

 50 - 0.500" x 5" ID 

 59 - 0.250" x 7" ID (beveled) 

 47 - 0.250" x 7" ID (beveled) 

 58 - 0.250" x 7" ID 

 Rubbers / Spacers / Shims / Separator Tooling 


  • Hydraulics System 
  • Water Cooler 
  • Removed and in Storage


Sold "as is, where is" EXW off foundation, USA.

Specifications

ManufacturerCincinnati/Forte
Year1969
ConditionUsed
Stock NumberS-303