| Specification | Description |
|---|---|
| Manufacture | Tecmo - Hunter |
| New 1972, upgrades 1991, 2004 | |
| Line Speed | 750 mpm max / 2460 fpm |
| Entry Strip Thickness | 0.6mm max / .236" |
| Exit Web Thickness | 2 x .008mm min / 2 x .000315" |
| Web Width | 1580mm max / 62.2" |
| Based on roll face of 1680mm | |
| Coil Size | ID - 600mm / 23.62" |
| OD - 1700mm max / 66.92" | |
| Wt - 7.5 mton max / 16,535lbs | |
| Separating Force | 223 mtons max / 491,492lbs |
| Equipment | |
| - Main Uncoiler | 2 x 370kW DC motors |
| - Doubling Uncoiler | 1 x 37kW DC motor |
| - Mill | |
| - Drive | 1 x 590kW DC motor |
| - Work Rolls | 280/305mm diam x 1680mm face |
| (11-12" diam x 66.1" face) | |
| - Backup Rolls | 710/760mm diam x 1680mm face |
| (28-30" diam x 66.1" face) | |
| - Roll Change Units (2) | 1 for work rolls |
| 1 for backup rolls | |
| - Gauge Control | AccuRay 5000 micro system |
| - Recoiler | 2 x 37kW DC motors |
| - Fire Protection System | CO2 system for mill stands |
| and pit. | |
| Sold "as is, where is" EXW on foundation, idled. |
PO Box 1164
Roxboro, NC 27573 USA
tel: +1 336 597 2370
fax: +1 336 597 8633
sales@phippsMetals.com